• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum and timber.

It is important to clean and oil UPVC doors and windows regularly. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the old frame very easily. However, if you have double glazed window repairs-pane windows that are anchored by internal beading, it will be more difficult to remove the old panes and put in new ones. In this instance it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not onto the floor, where they could be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will prevent drafts and water from getting into your property until a professional arrives to repair the window. It also acts as a barrier, deterring any intruders from gaining entry to your home. If the gap between the door and the window is significant, you may need to consider security screens that has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. In time, they could be affected by a variety of issues that include sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act when you notice your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to open the windows to reach the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.

If you aren't able to move the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles could also loosen. This is often caused by screws that have become undone over time, but it could also be due to the mechanism of the handle wears out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. You'll first need to close the window and perform an initial fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on how severe the issue is, old caulking may have to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens in the breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. It is very easy to change the hinges on a window, but it's simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The problem can be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo via our website will often solve the issue. We are happy to provide suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more easily. It can also stop corrosion and reduce the possibility of sticking. Ideally, you should do this once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. First, the hinges due to wear and tear can become misaligned, this causes gaps to develop where the sash meets the frame. These can be easily fixed by giving them a good cleaning, but if they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock, which is located on the hinge of the window, can be misaligned. Again, it's possible to just give them a thorough clean, however in some instances it could be necessary to have them replaced.

The second most frequent reason for draughts is window seals. These can become worn down or damaged over time, and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

Another, and most effective methods to reduce draughts is by using a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be positioned on the windowsill on top. These will keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and eventually, they will reach a point where it is more economical to replace them than repair them. If you are experiencing problems with your upvc windows, it's recommended to seek help from a professional immediately.